-
Bill
I have a 40 watt laser and I run 100% PWR and 10% spd, and even at that I sometimes have to make a second pass. Cheap craft mirrors one pass usually is enough, but better quality mirrors have a thicker or harder back coating, so it takes 2 pass's.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules