Craftsman table saw

[Jack Tyree]

If it's the 21833, i picked one up last year and did not have any alignment problems. Though the issue had supposedly been corrected, i still kept the packing material for nearly a year to be certain. The stock fence was okay for a few weeks, but the TS-LS is in a different class. Compared to the Ridgid, the c-man was at 15 amp vs 13 amp, and included the dado throat plate (was extra on the Ridgid). If you make that decision, do a search for "Sears tool coupon", if i recall correctly i found one that got me like $60 off. Using a sears charge card was good for 10% at that time, i think it's normally 5%. I hate having to scavenge like that, but it was time well spent. Not a cabinet saw, but as a hobbyist it works for now and most likely for most of my life.
earl

Thanx for the info, I appreciate your reply. I don't have any "fear" of Craftsman as some do. I've used their old smaller model saw for about 26 years had no trouble whatsoever, (for a small saw) and with the LS fence it's been wonderful for small work. I just need something with a little more power and a larger table for sleds. I think I'm going to pull the trigger tomorrow.

[Matthew Kalinowski]

Hi Jack, I purchased the 21833 in April 2014. Saw has been great so far and is free of the alignment issue.

Mine has the updated trunnion (stamped JH) and the new model # (351.218331), which no longer includes the dado plate.

Good luck!

[scott spencer]

I'd guess that many of the claims of being under powered are associated with alignment issues, and or blade selection. Even a well tuned 15 amp 1.5hp saw isn't going to compete with a true 3hp motor, though should be capable of ripping 8/4" stock with the right blade.

I'm still reading about occasional issues with all the saws that use that mechanism, including the Griz G0715P, even though I've read several claims that it's been fixed. It's kind of frustrating, but there's still some chance of the issue from what I can tell. Regardless, it never has effected every unit, just some. If you think this saw will serve you well, just be aware that it could be plagued with the alignment problem, look for it, and be prepared to return/exchange it.

The new Delta 35-726 is another candidate that I"d consider in this price range for a new stationary saw....Delta's reputation has taken some hits in recent years, but this saw is getting mainly positive reports from owners. It really boils down to picking your poison. There are no clear cut bonafide winners in this price range of new stationary saws that don't have at least some potential draw backs....I guess that same could be said of any new saw in any price range!

The Steel City 35990 series is another possible candidate, but they tend to cost more.

A good used saw is always an option if the right deal comes along. Good luck, and please keep us posted!

[Jack Tyree]

Thanx for all the replies! I guess it's pretty much like Scott say's: "You pays your money & takes your chances."

[Jerry Olexa]

There is no perfect solution..Each has minor drawbacks...Use you instincts after researching...

[Terry Beadle]

Also keep in mind, using a WWII in 3/32 nds kerf will seeming add power to a typical contractor saw. I use one on my radial arm Craftsman and it's still working fine after 25 years. Some times I hone it with a diamond file and she's good to go for another year.