Unfortunately I am not aware of a way to do it more quickly off the top of my head. You really end up treating each letter or number as an individual graphic using either the Epilog method or Mike's suggestion above.
I would be tempted to do the whole alphabet once. You would get pretty quick at the process. And then you would have it all done for future use. Then you could take the letters you need for the paragraphs and copy/paste them in as needed. Time spent up front would benefit you later on.
Or, a search of fonts might come up with one in this format to begin with? If you were lucky? Haven't looked for one though.
Any other Corel afficionados out there have a more efficient way of handling this?
Dave
900x600 80watt EFR Tube laser from Liaocheng Ray Fine Tech LTD. Also a 900x600 2.5kw spindle CNC from Ray Fine. And my main tool, a well used and loved Jet 1642 Woodlathe with an outboard toolrest that helps me work from 36 inch diameters down to reallllllly tiny stuff.