Hi we own a Chinese laser and it's amazing!! Though when looking up tips on how to engrave Speed percentage gives me a problem as I do not know the conversion. I have a good guess but please if someone can confirm.
Below is the exact specs of my laser. I will pull out the engraving spec.
- Engraving speed: 0-60,000 mm/min
My best guess is 60,000 divided by 60 gives me a max cutting speed of 1000 mm/s . So if someone says "90%" i would run it at 900 mm/s.
Please confirm?
Specifications:- Laser-type: Sealed CO2 laser tube *Long-Life 8000 Hours
- Laser power: 80 Watts (Optional 150 watt)
- Machine Power Source: 220VAC .. about 12 amps
- Machine Frame Size: 1160Tall x 1360Deep x 1730Wide mm
- Machine Frame Size: 45.5Tall x 53.5Deep x 68Wide inch
- Crated weight with accessories: 1130 pounds
- Engraving area: 1200 x 900 mm (47.2 x 35.4 inches)
- Motorized Worktable with about 10 inches of usable height
- Engraving speed: 0-60,000 mm/min
- Max cutting speed: 0-36,000 mm/min
- Laser output control: 1-100% software setting
- Location precision: less than 0.01 mm
- Highest scanning precision: 50-1000 DPI
- Operating temperature: 0-45 Celcius (32-113 Farenheit)
- Operating humidity: 5-95% non-condensing
- Minimum shaping character: English 1.0 x 1.0 mm
- Graphic format supported: BMP, PLT, DST, DXF, and AI
- Driving system: stepper motors and micro-step drivers
- Cooling mode: CW-5000 Freon-based, Coolant Chiller system
- Auxiliary equipment: Exhaust-fans, air-exhaust pipe, air assist pump
- Work surface: Iron honeycomb (Aluminum rails are optional)
- Controlling Software: LaserCut 5.3 with Leetro 6535/6565 DSP with USB
- Compatible Software: TAJIMA, Corel, AutoCAD, Photoshop
- Slope Engraving: Yes, Can be easily designed within the "Grade Engrave" function.
- Color separation: Uses color property to set function, speed, and laser power.