Why not glue up to the desirable size and their may be a local cabinet shop or Millwork store that has a wide planer or wide abrasive planer that could shave the top down past the radius edges.
good luck with your project!!
Contributor
Why not glue up to the desirable size and their may be a local cabinet shop or Millwork store that has a wide planer or wide abrasive planer that could shave the top down past the radius edges.
good luck with your project!!
[OP]
Member
Thanks again Jude I think I will scrub it down as you mentioned, much thanks! Don I havent considered that idea, but I might look into it and at least see if it would be cost effective. Id kinda like to get the experience under my belt for this bench, but we'll see. Thanks so much for your input and I might document my build to share with others hehe
Posting Permissions
Reply With Quote