Big, deep, heavy Ogee bowl

[Roger Chandler]

Okay, Tony & others who might be interested.......I added a pic of the inside on the original post above........sorry, I had already put away my photo setup last night, so you got a pic on the dining room table!

[Doug Herzberg]

That's a monster, Roger, and nicely executed. Maybe you don't need that big, new lathe after all. Just kidding. Everyone needs a bigger lathe.

[Roger Chandler]

Maybe you don't need that big, new lathe after all.

O contraire'........ I got plans Doug, Big plans! Thanks for commenting.......nice to hear from you!

[charlie knighton]

nice, Roger

[Roger Chandler]

nice, Roger

Thanks, Charlie!

[Bob Bergstrom]

I have the Oneway curved rest and would say going to a depth of 9" would be a cause of vibration on the end of that rest. The Robust looks more supported on the entire length of the rest. I think if you turn another, you should turn two 4 1/2" deep ones instead.

[Roger Chandler]

I have the Oneway curved rest and would say going to a depth of 9" would be a cause of vibration on the end of that rest. The Robust looks more supported on the entire length of the rest. I think if you turn another, you should turn two 4 1/2" deep ones instead.

You might just have a point, Bob! I wanted to maximize the piece of wood, so ........