-
Here's a crude sketch showing a 45-degree M&T joint with the shape of the tenon in dotted lines. The circle is the hole drilled through the mortised piece. Should the hole in the tenon be offset to draw the tenon in the direction of the arrow marked 1 (parallel to the right side of the tenon) or in the direction of arrown marked 2 (parallel to the left side of the tenon)? I'm thinking 2.
IMG_20160103_180351196.jpg
Michael Ray Smith
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules