Quote Originally Posted by Joe Adams View Post
I should add to my recommendation for the Dewalt 611 that the dust collection adapters work very well.

DND615 Fixed
DNP616 Plunge

They're available for under $10 each.
+1, with a caveat. Both work well with conventional cuts, but dust collection during climb cuts isn't effective with the plunge base.

I found this cutting slots, (are they dados or grooves when cut in plywood?), the other day. Chips everywhere on the first pass when I had both a climb & conventional cut edge. Virtually no chips escaped on the second pass with a conventional cut for the second edge to set the width of the groove.