Results 1 to 1 of 1

Thread: cutting board finish

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2015
    Location
    Cheyenne WY
    Posts
    164

    cutting board finish

    For my own I use a bees wax and mineral oil mix that I buy already mixed. I made 8 cutting boards that I will likely give away.
    Rather than use the wax/oil mix I think I want to use the Minwax's or Watco butcher block oil on these - easier to apply I think.
    Is the reapplication period after use greater than one over another (paraffin product vs bb oil)
    Any other considerations?
    Wood whisper likes the salad bowl finish and suggests the "film" is one is not really noticeable and that it lasts much longer than mineral oil.
    Many opinions and preferences on this subject!
    Last edited by Rick Johnston; 03-19-2016 at 8:09 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •