And getting worse lately. Today about 5 times while changing hatch routines. Sucks if you don't have the job saved...Not exactly sure why it's crashing, it's not even an 'installed' program. And it's been crashing during art/text editing.
However, the reason I'm concerned NOW is it just crashed in the middle of engraving! THAT's a new one, and can be particularly bad on someone's spendy suppressor, which is what I was engraving! Murphy did show a little sympathy by having it crash while I was test engraving instead of actual engraving...
Anyway, what to do? I can reload the drivers but most of the crashes occur when the drivers aren't in play. Unless the drivers load registry info? All I know is, the program will run in demo mode with no drivers loaded.
It's one thing to have it mess up my editing, but crashing in the middle of engraving is not cool. And I still didn't have the job saved, AND I'm using the rotary- trying to align new engraving to old to finish a job would be a nightmare...
Any ideas on what I should try? I running 2.5.3, and I also have a downloaded 2.7.6 version, but it won't work with my Dongle. Maybe Triumph has a newer version, I'll have to ask them...
Do files auto-backup? If so, where might they be located?
This is the event viewer log, one of the earlier ones today-
Log Name: Application
Source: Application Error
Date: 3/2/2017 11:47:32 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: KevsFiberPuter
Description:
Faulting application name: EzCad2.exe, version: 2.1.2.0, time stamp: 0x4d832e46
Faulting module name: NcPath.dll, version: 1.0.0.1, time stamp: 0x4d7d8301
Exception code: 0xc0000005
Fault offset: 0x00001d90
Faulting process id: 0xb4
Faulting application start time: 0x01d29382dd2e41eb
Faulting application path: D:\Triumphlasermini150\EzCad2.5\EzCad2.exe
Faulting module path: D:\Triumphlasermini150\EzCad2.5\NcPath.dll
Report Id: b0fbace6-ff78-11e6-9474-00e04c806233
Event Xml: (etc etc)
================
Just rebooted the laptop, don't need this, got TONS o' work to do!!
TIA for any help and advice!