Trotec Rotary Attachment

[Norman Roberts]

So I ordered and received the Trotec rotary, look nice. No instructions or manual.
Can not find one on line. Anyone have one ??

thanks

[Lyle Cheredaryk]

Page 38 on this manual just might be it.
https://www.troteclaser.com/fileadmi...-Manual-EN.pdf

[Gary Hair]

The manual makes it seem harder than it really is, it's quite easy to use once you get used to it. Your signature has "on order" by your Trotec, do you have one yet?

If I have time over the next few days I could probably shoot a quick video that outlines the basic steps to do something like a Yeti or Rtic mug with a simple graphic and text. From that you could figure out pretty much anything else. If I get the time to do it I'll post it in a new thread so it's easy to find.

[Art Anderson]

Just remember not to hot-patch the rotary with the Trotec powered up. Do the plug in connection with the engraver powered down. Trust me, learned the hard way: $600 will buy you a new board for the rotary.....

[Keith Outten]

See if this link helps:

https://www.youtube.com/watch?v=-9nTd5LmFuo&t=183s

[Gary Hair]

Just remember not to hot-patch the rotary with the Trotec powered up. Do the plug in connection with the engraver powered down. Trust me, learned the hard way: $600 will buy you a new board for the rotary.....

Ouch, expensive lesson!

[Jeffrey Dewing]

When I bought my Speedy 300, got it with the rotary. No instructions, but was told " DO NOT PLUG IT IN OR OUT WITH THE MACHINE RUNNING!" The rest is sort of common sense. Great pc. of equipment!