So far I'm pleased with it.
I would say it's pretty much what I expected it to be. Not sure but think I had to adjust the mirrors a little but not as much as I expected.
Really it pretty much worked out of the box.
Bodors tech support was also kinda what I expected, not great by USA standards but still decent. Right when I got it I had some questions, and they always came back to me.

I think I adjusted one of the belts for the x axis, as it was rubbing on the one side.
WIFI worked right out of the box.
Made a switch on the side so my rotary axis is wired in all the time, I just flip the switch to choose, rotary or standard.

If I was doing it again I would get a honey comb table instead of the slats. Also I think I would go with just the 80 watt as I think it would engrave detail better.
If you want an up and down table you have to request it as I think the standard machine doesn't come with it.