Actually, I think LMII would want to sell you the wood. But, you can ask . . .

The router methods of radiusing fingerboards all need to work with absolutely no slop, or else the fingerboard turns out pretty imperfect, which means you will have wasted your effort and the wood. Like I said above, unless you plan on building lot of guitars, the jigging up for this particular task is work you really should not take on, as it will feel like a disproportionate time suck. Either buy pre-made or do it by hand. Some jigging up for guitar building is easy and a bit fun. This particular task is harder than most to properly jig up for, and the tolerances have to be insanely tight.