HI, I have ten days (thanksgiving) to deliver this trestle table. Here is the table with the stain on it. I have 10 days before it absolutely has to be delivered. My dilemna is what to use as a finish that will be hard and cure by then, while still giving me enough coats.
Options I have considered.
Waterlox - but need 24 hours between each coat -they say to wait 72 hours after stain and then I will need atleast 4-5 coats which leaves no time to cure.
Ceramathane - water born acrylic finish, which I have used and liked very much. A little different "feel" when finished but can do 2 coats a day and start tomorrow.
Oil based poly - could most likely start tomorrow.
What do you think? Anyone used a better product in a hurry?