Felder Group USA Support

[Tim Derr]

Tim, I recently put a down on a A3-31.

Question:

1) DRO preference imperial or metric, pros and cons. I normally use the Imperial system but conversion from one unit to another is a non issue.

2) What are the mobility kit wheel diameter size? My garage has a wide groove aka expansion joint in the concrete flooring. Will the mobility wheels easily roll over this groove without hassel.

2) Extension tables ... As a hobbyist, what size and where should I add the extension table (infeed / out feed). Not sure what size to purchase.

Hey Girard,

Ignore the part of my last message where I said that you can use 503-156. I've been working with the bigger Jointer/planers a lot lately and had the infeed side confused.

All the best
Feel free to give us a call if you have more questions.

[Girard Ibanez]

Hey Girard,

Ignore the part of my last message where I said that you can use 503-156. I've been working with the bigger Jointer/planers a lot lately and had the infeed side confused.

All the best
Feel free to give us a call if you have more questions.

No problem Tim, I was confused myself after seeing the part. I was able to clarify via phone call.

Thanks again.