Personal preference. There is a lot of support from companies like TSO and others for 20mm at this point. I only use 3/4" for traditional hold-fasts (Gramercy in my case) at this point and those can't be used in thin tops anyway.
Moderator
Personal preference. There is a lot of support from companies like TSO and others for 20mm at this point. I only use 3/4" for traditional hold-fasts (Gramercy in my case) at this point and those can't be used in thin tops anyway.
--
The most expensive tool is the one you buy "cheaply" and often...
Posting Permissions
Reply With Quote