Need a replacement handle for an old jointer

[Dave Sabo]

2nd on Kipp.

They have metric too.

[Pete Costa]

Thanks all, I think you solved it for me. Mike, the link you sent looks very similar to what I have. My bolt is about 13cm or 9/16 in diameter. Is that close to yours? Pete

[Dave Sabo]

Pete , be careful. SCMI will have metric size and metric pitch threading. The Delta will not. Even if the diameter is compatible , the threads won’t be.

[Peter Kelly]

Delta sold re-badged SCM and Invicta machines for some time so there's metric overlap there.

[Pete Costa]

Thanks all, I think you solved it for me. Mike, the link you sent looks very similar to what I have. My bolt is about 13cm or 9/16 in diameter. Is that close to yours? Pete

meant to say 13mm. that would have been a really big jointer.

[Joe Calhoon]

M12 X 1.75 is a common Kipp handle size on Euro machines.
https://www.mcmaster.com/machine-han...read-size~m12/