Results 1 to 15 of 17

Thread: Whole house iv air scrubber: worth it?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2006
    Location
    Northeast Ohio
    Posts
    588
    We had our furnace replaced last December and added a uv filter to the system. It has the uv light plus a charcoal filter. It is amazing how well the charcoal filter removes cooking and other odors. It may take an hour or so to do that, but I am really satisfied it was a good improvement for us. Does it kills germs? Good question.

  2. #2
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,678
    Blog Entries
    1
    I was reading articles at various locations regarding UV lights in home HVAC systems. Basically what I found was that they will kill bacteria on the nearby surfaces that the light reaches for extended periods of time. With regard to the air flowing past them there are several problems. First the air doesn't remain in the light long enough to kill any spores or virus that might be in the air. Second, they aren't nearly strong enough to do the job even if the air flow was a bit lower. Third, the UV output of the bulbs (leds) drops off rather quickly and overall life is very short, like 90 days. If you read the literature from the manufacturers and HVAC retailers they are the best thing since sliced bread. If you read the government and medical studies they don't do much unless they are hospital grade using much more power and longer duration exposures. None that I could find were FDA certified.

    Don't take my word for it, do some checking yourself. My money will stay in my wallet for that particular accessory to a HVAC system.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  3. #3
    Join Date
    Oct 2007
    Location
    Falls Church, VA
    Posts
    2,347
    Blog Entries
    1
    Lee,
    Thats what I have read also although I didn’t find much yesterday.

    I’m reminded of my fathers story. When he was in the 8th grade in Montana in 1923 they saw an ad for a 100% guaranteed bug killer. The class saved their pennies and put in the order. What arrived was two wooden blocks marked A and B. The instructions said, “Place bug on block A and strike sharply with block B.” Their claim was truthful but misleading.

    UV, as you stated (and as I remember) is effective in sterilization bu only with prolonged exposure. I think I would need more convincing.
    Last edited by Roger Feeley; 03-24-2023 at 8:37 AM.

  4. #4
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,486
    Its a sales pitch not anything that really works. Repeating myself, you would be better off with a 4 inch pleated filter, If your HVAC guy does not want to do find someone else!!
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  5. #5
    Join Date
    Jan 2011
    Location
    Montfort, Wi.
    Posts
    808
    Our furnace had room for only a one inch filter. After looking at replacing the plenum and other metal work we decided on a uv filter. I have asthma and allergies and since the installation of that our air quality in the house has improved greatly.

  6. #6
    Join Date
    Feb 2018
    Location
    N CA
    Posts
    1,292
    Well, UV is natures sanitizer, but containing that in a light in a duct system which then typically gets forgotten, not the best idea. Do they work? Yes, sorta, definitely, maybe but I’m with Bill on the 4” pleat, if your system can handle it. If you have respiratory issues, it is likely worth the mod. UV lights degrade pretty quickly as they “solarize”. We run Winix (Costco) console air filters at the house and we are satisfied with their performance. ONe of my issues with UV lights is there is no method to know how quickly they are degrading. Also, be careful on increasing the MERV rating of your filters. To high a rating on a system not designed to handle it can stall your air flow as it increases the static pressure in your duct system..

  7. #7
    Join Date
    Sep 2014
    Location
    Northern Florida
    Posts
    665
    It will keep things from growing on the surfaces it illuminates. If you are concerned about mold on the inside of your blower unit, perhaps on the coils, it might be worthwhile, installed in the right place. The cost of changing the bulbs is significant and they should be changed whether they are still glowing (which they will be) or not.

  8. #8
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,486
    Quote Originally Posted by Dave Fritz View Post
    Our furnace had room for only a one inch filter. After looking at replacing the plenum and other metal work we decided on a uv filter. I have asthma and allergies and since the installation of that our air quality in the house has improved greatly.
    Your UV light does nothing to remove dust and pollen particles from the air. UV light can not sanitize fast moving air. It when the bulbs are new will keep mold and mildew off your AC coil and the section of ductwork that light can reach otherwise its useless.
    Last edited by Bill George; 03-24-2023 at 1:30 PM.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

  9. #9
    Join Date
    Apr 2013
    Location
    Kansas City
    Posts
    2,679
    So what exactly is the problem that you're trying to solve? The whole surface if the earth including its atmosphere is not sterile. I'd suggest it too if I was selling them.
    < insert spurious quote here >

  10. #10
    we have two furnaces/ac's one up stairs and one downstairs. The filters in the downstairs unit get dirty faster than the ones upstairs. We thought about some sort of extra filter system, but if we run the vacuum every other day, the filter doesn't get as bad. We run the vacuum just about that often anyway because of the German Shepherd. The other dogs aren't shedders. (he also gets brushed out side twice a week)

    There is no heat or ac in the basement, it is cut off from the rest of the house. I use a dust collector down there in the shop.

  11. #11
    Join Date
    Mar 2014
    Location
    Iowa USA
    Posts
    4,486
    Find a good sheet metal shop, not a HVAC salesman. If your in the South skilled labor and a sheet metal shop that knows what they are doing may be hard to find. Have them install a Honeywell 4 inch filter housing, yes it will involve some time and money.
    Retired Guy- Central Iowa.HVAC/R , Cloudray Galvo Fiber , -Windows 10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •