The good folks at Woodcraft told me about toning! So playing Mad Scientist I mixed up a batch of General Finishes Enduro Clear Poly and some water based Brown Stain. i did a 3:1 ratio. 3 parts poly, 1 part Water based Stain. I set my fuji q5 up and dialed in the fan pattern.( i think its correct) I used an old hollow core door that was properly prepped and primed with BIN. Upon spraying, the first swipe looked great... then the 50% overlap gave me a dreaded tiger stripe. What am i doing wrong? Should I have used a dye stain instead of pigmented stain?

378472746_7050651524954200_4124527428574137642_n.jpg 380052382_7050651721620847_5778572414026641717_n.jpg380096381_7050651551620864_3507034409799514830_n.jpg