Hello,

I am trying to get my grandfather's Delta drill press setup with a Delta/Rockwell motor 62-413 that I purchased recently. After installing, I discovered that the direction of the rotation of the motor is incorrect. I have included pictures of the wiring and the motor cover plate, but am not exactly clear on which wires get reversed. Currently, if I understand correctly, the motor is turning clockwise (CW). I believe the wiring picture shows this configuration, but am confused by all the yellow and green wires. I believe in order to change the direction of the motor, I need to take the yellow that is attached to the black wire and connect it to the green wire that is connected to the feed neutral (white) wire and take the black wire that is attached to the yellow and move it to the feed neutral (white)wire which is currently attached to the green wire. Can anyone please confirm?

Thank you,

Chris

IMG_1360.jpg
IMG_1362.jpg