We need s a shop tour! Every time someone has a question, you seem to have an answer stored in some sort of beautiful storage! Impressive!
Contributor
We need s a shop tour! Every time someone has a question, you seem to have an answer stored in some sort of beautiful storage! Impressive!
Contributor
I have never had a combination square that is an accurate as any of the Woodpecker's squares. I use a Woodpeckers MFT Square to square up the miter head on my Festool MFT table. It's perfect. I have other Woodpeckers squares. They also appear to be perfect 90's. I guess the problem with all squares is to find a standard to compare to. I have always found that the simple plastic triangles (30, 60, 90 and 45) that you buy in art or drawing stores to be very accurate. So that might be a good comparison. Or, maybe we're all just a little too concerned about "perfectly square". I do know, however, that Woodpeckers squares are CNC and laser cut and labeled and that, when using them, I never have anything out of square if it shows square on a Woodpeckers tool.
Posting Permissions
Reply With Quote