Ita a aftermarket option.
https://www.felder-group.com/en-us/s...-fence-sp91601
It allows you to bridge the gap that would otherwise be in between the in-feed and out-feed fences with the “fingers” and have a closed continuous fence during a lot of operations. It’s a very nice feature.
IMG_5497.jpg
That SCM shaper is a good deal. Far better than any others discussed, new or used. It even has a tenoning hood for running cutters larger than 250mm.
Phase converters are easy. I ran my whole shop for many years with a home made rotary converter before getting 3 phase from the utility.
Also looks like it has a pinned fence with mechanical digital readout. A very desirable option especially if using European tooling.
most new shapers in the 5000 dollar range have marginal fences.
Last edited by Joe Calhoon; 03-26-2024 at 8:16 PM.