-
I have a cast iron Davis Wells horizontal boring machine that I rebuilt. It gets some use. A two head (2 drill bit head) would be faster and more useful. Most joints I use dowels for I usually use 2 dowels. Drilling them both at the same time with perfect spacing would save a lot of time. For me dowels are as much about alignment as they are about strength. A horizontal boring machine does a better job aligning dowel holes than any of my doweling jigs.
I don't own a Domino and for what they are going for I don't foresee owning one any time soon. Pocket holes have replaced dowels in face frames for me. Face frames used to be where I used dowels the most.
Last edited by Michael Schuch; 03-28-2024 at 2:27 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules