What's with Festool?

[Steve Mathews]

I recently picked up a Festool OF-2000E/1 router at an auction and can't figure out what the fuss is all about with the Festool brand, at least with respect to this tool. The other routers I have from Makita, Bosch, Milwaukee and Porter Cable are just as capable at a fraction of the cost. What am I missing? However, the box is pretty cool and easy to store.

[Dan Friedrichs]

The router, while having some nice features, isn't nearly as differentiated from the competition as their sanders, Domino, drills, and dust extractors. You might (or might not) feel differently if you had picked up a sander, instead.

[Patrick Kane]

Hey Steve,

I had a OF2000 that i picked up in a used lot years ago and immediately turned around and sold it for a profit. I wouldnt judge the entire brand based on just that router. One, im guessing your unit is 15-20 years old. That tool was discontinued from production 10-12 years ago, so its atleast that old. Two, i dont remember it having too many of the latest design features. Dust collection was marginal compared to the newer hood designs for their current routers. I dont remember its accessories playing nicely with the guide rail system etc. Finally, i think your observations are accurate and i agree with them. It is a quality router, but nothing special compared to the biggest makita/comparable. My last point i will say about the OF2000 is that it was always a less expensive router offered by Festool, and i can speculate that it was tailored more towards the carpentry/construction community. Going way way back, i think it was maybe 50% less expensive than the OF2200, and even less expensive than the OF1400(which is a less powerful motor).


If you are interested in exploring whether festool is 'worth it', then i would go play around with an OF2200, domino(500 or 700), and a sander. The OF2200 is really expensive--especially when you combine the accessory kit, which i definitely think you should--but it is 100% the best router ive used. The only way it could get better is if they included an LED light onto the workpiece. My router is years old, so this very well could have been added already. The slight offset of the handles to the base adds a natural but subtle side pressure for using the edge guide accessory. The quick connect/disconnect base plates are very handy for specific exercises. The ratcheting collet with one wrench is another nice feature. Some other brands may have caught up, but a decade ago that router really impressed the heck out of me. It still does when i use it.

[Michael Burnside]

I've never seen/used the OF-2000E so I have no idea how it compares. I personally own Bosch, Milwaukee, Dewalt and a Festool OF-1400. Hard to directly compare them, but the quality, build, dust extraction and design of the Festool is by far the best. The Bosch is for sure a workhorse (I own two), nothing fancy, but built well. The Dewalt/Milwaukee are my go-to palm routers that I use on every project. But when it comes to precise work, I reach for the 1400. But different strokes for different folks I guess.

[George Yetka]

I have the mid size one. the advantages i see are the easy hookup to rails/edge guides and the dust collection is very good for a router

[Andrew Hughes]

I have the 1400 last year the bearings need to be replaced so I did that. I bought it when they first came out it’s a great router compared to the porter cable model I used to use.
Really don’t like routers but the 1400 is a good precision one.

[Randy Heinemann]

The main differences for me are:

1. Exceptional dust collection (which might not be as developed on older tools)
2. Festool routers have precise markings on the base for the center of the bit so it's much easier to layout and rout exact locations (certainly not impossible to do on other router without that feature)
3. It appears to me that Festool router motors have the edge in power for the same number of amps, but that I get from use more than specs.
4. Festool routers can be used on their tracks (like a tracksaw) and this comes in handy when I'm using a router to precisely rout a dado or groove or a specific area out of a board.
5. The edge guides and hardware used to rout on a track have very precise adjustments to rout exactly where you want.

I found the differences significant, but they are expensive and the features may not be valuable to others.

[Jim Becker]

That particular router is very old and doesn't necessarily represent the current brand. The current version of that class router is the OF2200 which is a "beast" of a router. I don't own that one, but do own the OF1400 and the OF1010. The OF1400 is my primary router when I need a hand-held router and I find it outstanding, including dust collection capability and versatility, such as compatibility with the track as Randy mentioned. I have a lot of their tools...about half bought in the mid-2000s and the rest more recently, including about a week ago for the latest. I like the brand and "system" and for me, they have been a good value. But that absolutely may not be true for others. It's ok not to prefer them.

[Tom Bain]

I have been a Dewalt DW621 user for-e-ver, and I love that router. However, the OF2200 looks pretty tempting. I’m especially interested in the larger plunge range. I think it’s like 3” compared to a little over 2” for the Dewalt.

[Larry Edgerton]

Bought one new, hate it. Collects dust for me now.

[Jimmy Harris]

Bought one new, hate it. Collects dust for me now.

Superior dust collection is something Festool prides themselves on.

[Mike Cutler]

I recently picked up a Festool OF-2000E/1 router at an auction and can't figure out what the fuss is all about with the Festool brand, at least with respect to this tool. The other routers I have from Makita, Bosch, Milwaukee and Porter Cable are just as capable at a fraction of the cost. What am I missing? However, the box is pretty cool and easy to store.

Steve

I've never used a 2000, but I do have a 2200OE, and it is a very nice tool.It doesn't show it's "true colors", until you throw some big work at it.
Mine was purchased to route out holes,and template work, in 1-1/2" thick Padauk panels. My Porter Cables were tearing the heck out of my hands, but that Festool did the work very smoothly, with the same bit that was installed in the PC's.
In 4/4 softwoods, domestic hardwoods, and cab ply, you won't see much difference other than you can literally use it one handed in those materials. Get it into some dense thick tropicals and it's a different game. I still have my PC's, and they're very capable tools, but the big Festool is much, much smoother ,and vibration free.
It's a lot of $$$$ and you have to know you want it, or have a need for it.

I do have a few Festool tools, but I don't consider myself a Festool aficionado of any sort.

[Warren Lake]

any new router is a smooth machine compared to ones that have worked hard. My Makita plunge 3Hp started out tight and became a rattle trap. Not the routers fault just the operator. I wont put the time into it to change bearings. I abused three porter cables and they still work great original bearings in them. Sure they could be replaced and be tight like new but its not needed. Those large routers did tons of work and never had issues.

[Ron Selzer]

Personally I prefer horsepower. I use a higher horsepower router than others I know for the same job. I firmly believe that a higher horsepower router is easier to use as far as not bogging down , cutting cleanly and going where I want it to go. I don't use 1/2" bits in small routers nor do I use 1/4" in larger routers. The PC690 can go both ways, I typically use 1/2" bits however do have 8mm and 1/4" collets for them. Trim routers and PC 100's are 1/4" machines. Larger routers are 1/2" only and have plunge bases.
I have over a dozen routers of various sizes and prefer to keep some dedicated to one purpose and others get used for whatever.
As far as sanders go once I got my 15" wide belt sander there is very little need for a ROS. Once I get back in the shop and try the new to me stroke sander the ROS may not get used or used very little.
I don't have any Festools strictly due to price. Would like to have a Domino, maybe someday that project will come along that really needs one or the budget is high enough to just buy one.
Ron

[Dave Sabo]

Well, it’s tough to say.

As previously mentioned , that router is 10years old minimum and the design/tech closer to 20 (or more).

It was a 300-$400 router when brand new and could be had for less than $200 from a ReCon sale. They were $325new when the discontinued notice came down. For those prices you got the the most powerful 110v router available on the market, a speed control that didn’t crap out like porter cables , a really good fine adjustment knob, easy table mounting, and a spiffy carry case. It was also one of the (if not only) large router that offered dust collection.

My guess is you overpaid for yours and that’s part of the perception.

It also highlights another benefit of the brand : long term value. Few if any of your other tools are worth close to -or- more than you paid for them 10 years on.