I also need a rebate all the way around each panel...two saw cuts..one to make a kerf cut..
May Project, Raised Panels, rebate kerfs.jpg
And the second setting to remove the waste...
May Project, Raised Panels, rebate fitted.jpg
So that the panels will sit into the grooves in both the rails and the stiles..
So..2 hours in the shop, this morning..
May Project, Raised Panels, done.jpg
And all 16 panels are done, awaiting fine tuning, of course...

Made a royal mess of the shop's floor, too...
May Project, Raised Panels, busy saw.jpg
I think the saw and I both needed a rest...

Tomorrow? will be working on the stiles....and trying for a glue-up of at least one side by Monday...

Stay tuned...Have about 2 weeks before the Boss is scheduled to come home...would like to be done by then? We'll see...