[OP]
Contributor
A guy I know is having trouble finishing chairs with white nitrocellulose lacquer.
He said when it's dry it rubs of easily. He's had to strip the chairs down again.
I asked him what primer he used and he said BIN. Might this the cause of his woes?
IMG_7965.jpg IMG_7968.jpg IMG_7969.jpg
Sorry about the sideways photo.
Moderator
Solvent based lacquers should generally always be used with the same brand vinyl sealer/primer for best results. Your acquaintance should ascertain what the correct product is to use with the "Luster Lac" product.
--
The most expensive tool is the one you buy "cheaply" and often...
Posting Permissions
Reply With Quote