OK All I need some advice. We will be moving from Freehold, NJ to Hillsborough NJ end of April beginning of March. The total distance is 40-50 miles at the most. We are having a moving company do the house but I think I have to move the shop for my own peace of mind. The two options I am considering are,
1. Rent a large box truck with a lift gate and get some friends and some beer and have at it. (No Beer until all the tools are safely in the new garage )
2. Rent a 16' PODS unit. They are rated for 8000lbs and have tie downs inside the unit and the units are always kept level.
The equipment is going from one garage to another. No Stairs or distance on the delivery side end.
The equipment is as follows. Almost all the large tools are mobile.
Unisaw with 50" biesemeyer
Yorkie Jointer
Oneida 2hp DC with 6" PVC duct work.
Grizzly Band Saw
Dewalt RAS
Jet DP
Jet Disk/belt sander
Router Table
CMS
Dewalt Planer
Craftsman/King Seely Lathe
26 Gallon Compressor
48" MAC Tool Box (Loaded)
Misc Hand and Power tools. (Started boxing a lot of it up.)
Let me know what you think and suggestions would be appreciated!
Thanks
Greg