Grinding Shellac

[ROBERT FALK]

I've hear of people grinding shellac flakes in a coffee grinder prior to mixing in the solvent.

My questions are:

1. Is there a problem if you "overgrind" them to espresso grade?
2. Does it do any damage to the grinder?
3. Should it be dedicated to only shellac flakes thereafter?

PS: I know I could have posted this in Project Finishing - I didn't want to miss out on any smart / funny remarks!

[lou sansone]

I've hear of people grinding shellac flakes in a coffee grinder prior to mixing in the solvent.

My questions are:

1. Is there a problem if you "overgrind" them to espresso grade?
2. Does it do any damage to the grinder?
3. Should it be dedicated to only shellac flakes thereafter?

PS: I know I could have posted this in Project Finishing - I didn't want to miss out on any smart / funny remarks!

I use a dedicated grinder. All you are trying to do is to get the flakes into smaller pieces to dissolve easier
Lou

[Cecil Arnold]

What Lou said, and it doesn't really flavor the coffee much.

[Jim Becker]

A cheap coffee grinder does the job nicely...blade type...and I really don't think you need to worry about "too fine", per se.

[David Wilson]

Shellac is a food safe finish. Used to coat some pills and M&M's so you could use the grinder for coffee again.

[Jerry Olexa]

No, No and yes. It helps dissolve the shellac as does putting the container in a warm bowl of water. Yes, I wouldn't grind coffee with the same grinder

[Joe Zerafa]

When I am in a rush to mix some shellac I just let the batch sit on top of the washing machine (my wifes usually washing on weekends when I get to play in the shed) the constant movement really speeds up the mixing process.


Joe