Friends,

I have finally *fully* finished my workbench. When the basic bench, version 2.0, was done I posted a gloat. Now that the under bench storage is finished I'm ready to move on to a completely different project. There are five drawers on the right side and the left side is open for larger tools.

I'll probably keep corded drills, drill press mortise attachments, etc. in the cabinet and measuring, marking, etc. in the drawers. The carcass is made from plywood with purple heart trim and the drawers are made from hard maple.

Click for my workbench page, the new pictures are toward the bottom.



My apologies to those who saw the duplicate gloat on woodnet.