FreeStuff Drawing - BowClamp 01/20/06, WINNER
FreeStuff Drawing from;
BOWCLAMP
Three Bowclamps, one of each size 2',3',4', including free shipping to the FreeStuff Winner from SMC Member Craig Feuerzeig of Zig Industries.
---------------------------------------------------------------
If you have ever thought, "You can never have enough clamps..."
The Bowclamp is a "good caul" designed to clamp up to 4 linear feet, with only one clamp at each end. It uses modern CNC technology to realize an age old idea... the perfect bow shaped arc.
Ideal for solid wood edgebanding, instead of glue and a clamp "every couple of inches" (requiring typically 10 clamps over four feet, and giving uneven pressure), The Bowclamp uses 2 clamps and gives equal pressure the whole way, making for a finer joint. You can edge all four sides of a table at the same time, with only 4 bar clamps, getting equal pressure all the way around. There is a T-slot on the back, allowing the pad of the clamp to fit inside, making it adjustable for any size workpiece, while eliminating fumbling with the clamps. They are handcrafted in the USA, from northern rock maple, and coated in wax so glue won't stick.
Perfect for solid wood edgebanding, instead of glue and a clamp "every couple of inches" (requiring typically 10 clamps over four feet, and giving uneven pressure), The Bowclamp uses 2 clamps and gives equal pressure the whole way, making for a finer joint. I can edge all four sides of a table at the same time, with only 4 bar clamps, getting equal pressure all the way around.
Many uses in the shop: gluing face-frames to carcasses, counter-top edges, veneer and marquetry, hard to reach areas, etc.
For more information visit the following web site;
http://www.bowclamp.com
This FreeStuff Drawing is scheduled for Januay 20th, 2006 at 8pm EST. The winner will have one week to post a message in this thread and claim their prize.
Good Luck to All.........
