Looking a picking up a large skew for use on the outside of end grain hollow forms and and trying to decide the differences between the 1-3/8" Lacer skew and the 1-1/4" Crown rolled edge skew.

Obviously the Lacer skew has a radiused cutting edge and is an 1/8" wider. It's listed as 3/8" thick while I can't find any thickness on the Crown. Lacer handle is longer by 2" Lacer bade is 6-1/2" while the Crown isn't listed.

Pretty sure I can justify the extra 1/8" thickness away and grind the radius myself. Only thing I'm stuck on is the potential thickness difference and maybe some of the Lacer magic being transfered. But not sure I can make the ~$38 leap based on that.

Any thoughts?
thanks
Bob