Hello all,
I've been having this issue with corel since I started up. Whenever I select anything besides 333 dpi in my driver to send to the laser the image or vectoring job either increases or decreases in size. For example, if I have a project to cut/egrave and I send it to the laser at 500 dpi, the image will be much smaller then that of which I sent it. Also if I send it to the laser at 166 dpi in the driver then the image will be much larger then that of which I sent it. This problem only happens in corel. I use any other cad program (Vectorworks, Open Office DRAW ) and this issue is not present. Any help would be appreicated, I'd like to break the 333 dpi barrier! haha.
Thanks in advance
Matthew Sullivan