Epilog Driver & Firmware Update

[Jeff Chumbley]

Peck, I take it this does not include the 24TT?

[Peck Sidara]

Jeff,

Unfortunately not. The new features are only available on the Mini/Helix/EXT and FiberMark systems.

Regards,

[Peck Sidara]

Shane & Frank,

The settings for the new laser tickle are noted but doesn't go into detail as it's a setting that customers typically shouldn't adjust. The mode setting determines if the tickle signal is on or off. The intensity setting determines the amount of time the tickle is on for. For all intent and purposes the default settings are 1 & 1. The defaults are preloaded when the firmware is uploaded.

Only if you have a delay in laser fire after uploading the firmware should you contact technical support to determine what the ideal setting should be adjusted to.

[Shane Turner]

Shane & Frank,

The settings for the new laser tickle are noted but doesn't go into detail as it's a setting that customers typically shouldn't adjust. The mode setting determines if the tickle signal is on or off. The intensity setting determines the amount of time the tickle is on for. For all intent and purposes the default settings are 1 & 1. The defaults are preloaded when the firmware is uploaded.

Only if you have a delay in laser fire after uploading the firmware should you contact technical support to determine what the ideal setting should be adjusted to.

Thanks Peck. That answered my questions. Much appreciated.