Does anyone know of a good quality collet extension for use in a 1/2" collet that allows the use of both 1/4" and 1/2" bits without buying an additional adaptor?
Or...if you can provide me with an alternate solution - I have a Jet Xacta lift (Jess'em mast'r lift) and it uses plate mounting instead of a motor capture style mounting. This puts the router way to low to do above the table bit changes. Thus, I figured a collet extension would do the trick. Let me know if you have any other options.
*I don't care for the one that tightens w/ an allen wrench set screw