Leaning more and more towards, or better said, sliding down the slope, to purchase either a LN 4 or 4 1/2. I understand that the high angle frog beds the blade at 50 degrees for wood with a hard to plane grain. I have read a number of posts and articles regarding the HA frog, but never saw anything on how a HA frog works on wood without a change in grain direction, etc. or did I miss something.
So since I can consider only one plane, does the HA frog cover all applications, or should I just stay with the standard and on the rare occasion I run into tough grain, deal with it the best I can. Thanks for the opinions,
Rick