Results 1 to 8 of 8

Thread: G0570 out of stock

  1. 03-11-2008, 3:36 PM #1
    Paul Muhlstadt
    Paul Muhlstadt is offline [OP] Member
    Join Date
    Mar 2006
    Location
    Kankakee, IL
    Posts
    33

    G0570 out of stock

    Darn, after researching and following threads, put my order in for a G0570 this morning. Just got a message that they are sold out. Customer service says my choices are the G0555 with riser or the G0513 with aluminum wheels. Neither one turns my crank. Have tried a G0555 with riser and wasn't happy with the flex at the riser. Would really like a G0513X2 but I'm just a hobbiest and can't see spending $1200 on a band saw. Guess I am back to looking again.
    Reply With Quote Reply With Quote
  3. 03-11-2008, 5:51 PM #2
    Marcus Isaacson
    Marcus Isaacson is offline Member
    Join Date
    Nov 2007
    Location
    Crivitz, WI
    Posts
    38
    I guess I cut it really close then too. I ended up ordering the thing last night and confirmed the sale this morning. I hope the saw is as good as it looks but unfortunately they are discontinuing it, at least as far as I was told. Sorry you couldn't pick one up too.
    Reply With Quote Reply With Quote
  4. 03-11-2008, 5:58 PM #3
    SCOTT ANDREWS
    SCOTT ANDREWS is offline Member
    Join Date
    Dec 2006
    Posts
    89
    Quote Originally Posted by Paul Muhlstadt View Post
    Darn, after researching and following threads, put my order in for a G0570 this morning. Just got a message that they are sold out. Customer service says my choices are the G0555 with riser or the G0513 with aluminum wheels. Neither one turns my crank. Have tried a G0555 with riser and wasn't happy with the flex at the riser. Would really like a G0513X2 but I'm just a hobbiest and can't see spending $1200 on a band saw. Guess I am back to looking again.


    If your just a hobbiest,the GO513 is more than enough saw.
    Reply With Quote Reply With Quote
  5. 03-11-2008, 6:43 PM #4
    Brian Kent's Avatar
    Brian Kent
    Brian Kent is offline Member
    Join Date
    Apr 2006
    Location
    Escondido, CA
    Posts
    6,224
    Check the price again on the G0513X2. It is $950.
    Veni Vidi Vendi Vente! I came, I saw, I bought a large coffee!
    Reply With Quote Reply With Quote
  6. 03-11-2008, 6:59 PM #5
    Steve Kolbe's Avatar
    Steve Kolbe
    Steve Kolbe is offline Member
    Join Date
    Jan 2008
    Location
    Lincoln, NE
    Posts
    52
    The nice thing is that the 513 is a bigger saw...

    Have you looked at the Rikon 10-325? It's the same price as the Grizzly 513...
    Reply With Quote Reply With Quote
  7. 03-11-2008, 7:20 PM #6
    Don Bullock's Avatar
    Don Bullock
    Don Bullock is offline Member
    Join Date
    Nov 2006
    Location
    Fallbrook, California
    Posts
    3,562
    Quote Originally Posted by Brian Kent View Post
    Check the price again on the G0513X2. It is $950.
    Actually $1,044.00 with shipping.
    Don Bullock
    Woebgon Bassets
    AKC Championss

    The man who makes no mistakes does not usually make anything.
    -- Edward John Phelps
    Reply With Quote Reply With Quote
  8. 03-11-2008, 8:28 PM #7
    Russ Massery's Avatar
    Russ Massery
    Russ Massery is offline Member
    Join Date
    Dec 2004
    Location
    NW Indiana
    Posts
    1,050
    Paul, I have a old Delta 14" for sale. I'm not too far away. If your interested P.M. Me if you are.

    Russ
    Reply With Quote Reply With Quote
  9. 03-11-2008, 10:22 PM #8
    Erech Myers
    Erech Myers is offline Member
    Join Date
    Jan 2008
    Location
    Alpharetta, GA
    Posts
    73
    Quote Originally Posted by Paul Muhlstadt View Post
    Darn, after researching and following threads, put my order in for a G0570 this morning. Just got a message that they are sold out. Customer service says my choices are the G0555 with riser or the G0513 with aluminum wheels. Neither one turns my crank. Have tried a G0555 with riser and wasn't happy with the flex at the riser. Would really like a G0513X2 but I'm just a hobbiest and can't see spending $1200 on a band saw. Guess I am back to looking again.
    I've been researching bandsaws a little too even though I have a bunch of things on my list that are priority over it. Have you looked at the Rikon 10-325? For a hobbiest like me, it should have plenty of power. I want to be able to do my own resawing, so the Rikon is my top choice because it has 13" resaw capacity.

    Rikon 10-325
    http://www.woodcraft.com/family.aspx?FamilyID=20041
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Cup & Twist Prevention in Thin Stock
    By Paul Fitzgerald in forum General Woodworking and Power Tools
    Replies: 6
    Last Post: 01-14-2008, 11:36 PM
  2. Milling stock with a combination of hand and power tools
    By Ted Fullerton in forum Neanderthal Haven
    Replies: 14
    Last Post: 03-28-2007, 11:33 AM
  3. Round stock cutting on bandsaw
    By Greg Pierce in forum General Woodworking and Power Tools
    Replies: 8
    Last Post: 01-15-2006, 10:06 PM
  4. Buying or making solid drawer stock
    By Dan Gill in forum General Woodworking and Power Tools
    Replies: 15
    Last Post: 03-29-2005, 9:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules