I am anticipating a possible problem mounting Euro hinges. I hope this description makes sense. I want to mount two doors, half overlay, on the same vertical panel (3/4" thick Melamine). The hinge plate mounting screws are 5/8" long. If I mount the hinges at the same vertical location I think the screws for the hinge plate will run into each other. I don't have the hinges yet so I don't know how thick they are. If they do, I presume either the left or right side hinge will have to be relocated vertically so the screws don't run into each other. I know this sounds stupid but if I have to shift the hinges won't the visual look weird - hinges at different heights?