How to Remove Button Plugs

[Wes Terry]

I have used an old drill bit to carefully drill to the screw and then remove it. Since you don't know how large the screw head is you may have to dig around a little. You can than replug the hole maybe with a slightly larger plug.

Drill a small-ish hole in the plug, drive a small screw into it - when the tip hits the head of the existing screw, it should push the plug out as you keep driving. It shouldn't mare the head of the existing screw too much, i don't think.

Thanks guys for your suggestions. Jason, I'll let you know how your procedure works.

Wes