-
The floor is in my house and is butted-eased edge-with biscuits/ dominos .
On some planks I put relief cuts in the back.
The edges were done one at a time with a joined together festool straight edge- circa 18'.
I V carved poetry in the floor on the shopbot and filled it in latter with coloured epoxy.
It was a bear to do and I blew up the cutterhead on my 16" hammer j/p and fried the feed motor on my woodmaster sander.
My thinking started like yours when the lumber arrived .....I probably wouldn't do it for a customer, but would do it again for myself.
Major brownie points were scored with the wife.....put a value on that!
I hate working Jatoba! think Byrd headed planer or kobalt tooling
Good luck!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules