New Home For Precious Cargo.

[gary Zimmel]

The last item to be done on the legs was to cut a 10 degree pyramid on the tops.
I knew that there would be some tear out on my miter saw.
Because of this I set up a jig to prevent it.
Cut one block at 10 degrees and clamped another to the fence.
Worked pretty slick.

IMG_0139.jpg

All my leg assembly pieces.
Sanded with my new Festool toys.
Boy somebody should of told me hole steep a slope that stuff is.....
The corners are rounded over on this cradle.

IMG_0141.jpg

And now it's glue up time. I did one side at a time.
Too many curves to get both done and fitted right at once.

IMG_0142.jpg

With the clamps on the second sides I called it a day.....
Not much more to do and I get to see what this will look like.
I have to ask John Keeton if I can now join the walnut club.



.