Having assembled my christmas present and rolled it into place I immediately noticed that as the cannister is setting on 3 supports it has a tendency to rock a little. This, to me, equals shoddy design in the least. Have noticed that the Grizzly model has a solid/square pipe to connect the blower unit to the cannister unit. Seems that this would be much more stable when moving the unit from machine to machine.

Now I'm not disatisfied with this unit, as I picked it out myself. Am I being to critical. Should I try to strengthen the 3 supports Seems any additional supports to the 3 legs would interfere with the plastic bag deployment. Should I, or has any one tried to, add 4" solid pipe in place of the plastic hose.

I'll set back and see if I get any response.

Thanks