Quote Originally Posted by Hilel Salomon View Post
Steve, did you make the tool and the snake holder? I do like the Easy Wood C10 and Ci1, but I'm not sure that I want to pay 20 bucks for the round carbide cutter.
Homemade for about $60 - the most expensive material was the 1 1/4" trailer hitch receiver tube that I used as outside of the adjustable upright holder. The rest is 1" square and some bearings from the local machine shop.

As far as I know the round carbide cutter is only available from EasyTools - the round cutter you mentioned is not the same, it's fatter and doesn't have as good an edge for fine work. But you don't go thru the rounds that fast, you only use them for the last pass with a light cut. It's very forgiving and just snuggles up to the wood while taking a tiny shaving.