Results 1 to 15 of 16

Thread: A couple of Aspire projects

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-04-2010, 8:59 PM #1
    Tony Joyce's Avatar
    Tony Joyce
    Tony Joyce is offline [OP] Contributor
    Join Date
    Feb 2007
    Location
    Piedmont Triad, NC
    Posts
    795

    A couple of Aspire projects

    These are a couple of Aspire projects I've done lately. The plate is Wayne Barton inspired and about 12" dia from 7/8" thick Butternut with a glazed and lacquered finish. The plate takes about 45 minutes to run both sides. The box is 1-1/2" X 3-1/2" X 5" and is Goncalo Alves with antique oil finish. Box takes about 15 minutes to run.

    V-Carve 005s.jpg V-Carve 006s.jpg

    V-Carve 008s.jpg V-Carve 011s.jpg
    Last edited by Tony Joyce; 03-05-2010 at 6:07 PM.
    "Only those who have the patience to do simple things perfectly will acquire the skill to do difficult things easily.”
    Friedrich von Schiller (1759-1805)

    "Quality means doing it right when no one is looking."
    Henry Ford
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules