Recently I bought a Chestmate dovetail jig at a wood workers convention and I think I got a raw deal. The router can tilt a bit on the jig and indicating that the plane of the jig is not machined very well and the first joint that I put together does not look too good. Has any body used one of these and had any good finished looking dovetail joint? There are a lot of variables I had to deal with in the set up to cut just one dovetail. So far I am not to impressed. On a scale of 1 to 10 I would give it about a 2. I may be missing something but so far it is a waste of money.