Right now I have all my wood stored on wire shelves (the type they use in restaurants) and I am looking for a better way to store them. Right now I have to pull the boards out towards the garage door since the posts prevent me from just yanking them out, and if I have a board at the bottom of the stack I have to pull out a lot of wood. I have been looking at the Triton wood storage system that gets installed on the wall. They claim that it can hold up to 110lbs per level but I am not sure how to calculate that based on the wood that I have how much it would hold. The wall I would attach it to is an outside wall so I would assume that it can take the weight as well.

I have a 2 car garage for my shop so I would like to get the wood up further so I can store my jointer underneath the wood, and reclaim some of that space.