I've been working on a whole house job for the last couple of months and I'm pretty close to being done. I have to do the crown, toekick and light molding tomorrow. Out of the 79door/drawer fronts I installed there is one rather large one that is giving me trouble. It is one of the doors for the pantry and it bowed on me. I didn't notice it until I was installing all the doors the other day. The door is roughly 20" x 55". Before I start making a new one I wanted to see if anyone has had a similar experience and came up with an alternative solution. Is it worth pulling it off and setting it under cinder blocks for two weeks or would I just be wasting my time?
Reply With Quote