Results 1 to 7 of 7

Thread: HD Ready Sign

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-05-2011, 3:38 PM #1
    Mick A Martin's Avatar
    Mick A Martin
    Mick A Martin is offline [OP] Member
    Join Date
    Oct 2008
    Location
    Seattle, WA
    Posts
    308

    HD Ready Sign

    Here is the last HD theater sign I made for my son. The material is 1/2" MDF, no roughing toolpath, finishing toolpath was done using 1/8" taper ball nose, 14,000 RPM and 400 in/min feed rate .... yes 400 in/min.


    http://www.youtube.com/watch?v=hLLc1vwxO9Y

    Mick
    Last edited by Aaron Koehl; 01-07-2011 at 3:04 PM.
    Hardware:
    CAMaster 508 ATC + Recoil
    2013 Trotec Speedy 100, 60 watt, rotary attachment, vector grid.
    Software:
    CoralDraw - Aspire 9 - EnRoute

    Custom Architectural Signage
    Mick Martin Woodworking
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules