A number of years ago I built a New Yankee Workshop router table and mounted my existing DeWalt 625 plunge router in it. It has worked fine and I have no problems with it other than the fact that I have to either pull it and the plate up from the top or get under the top to make adjustments and change bits. I have learned to work around this. The thing that bugs me most is when I need a hand held router for a particular job and have to dismount the DeWalt router for this purpose. I have decided to buy another router to circumvent this problem and this is where my quandary comes in. Do I buy another router for under the table use and then use my DeWalt 625 as my hand held router or would it be better to leave the DeWalt under the table and buy a second router for use as a hand held.

Your thoughts would be appreciated and if you could make a recommendation for a second router that would be great too.