These ornaments are easy enough that even I can do them with my 4th grade math skills. First you take two pieces of wood approx 12" x 3" x 3/4". The length is a little extra but I don't like getting my fingers too close to the saw blade to it gives you a little to hold on to. The other dimensions can vary so long as both are the same. Then you need a 12" x 3" piece of 1/8" thick birch plywood. Just glue the plywood between them like a sandwich and let it dry.#1 glue up.jpg
Then you set your miter saw (or table saw with sled) to 30 degrees, cut the very end off the glue up, flip it over 180 degrees and cut the first segment. Just repeat that until you have 6 segments.#2 30 degree cuts.jpg#3 continue 30 degree cuts.jpg#4 all 6 pieces cut.jpg
to be continued.....