I am currently in the process of making 2 dressers. The first has 9 drawers and the second has 6 drawers. I want to use half-blind dovetails but am unsure how to proceed right now. I do not have a jig but do have a few routers.

I saw this article a few years back.

http://www.popularwoodworking.com/te...l_jig#comments

it talks about using a router to cut the pins and then cut the tails either with a bandsaw or by hand. My bandsaw is currently out of commission so I was thinking that I could use my router to cut the pins as described and then go out and buy a dovetail saw to cut the tails by hand. Am I crazy to think that I could pull this off?

I saw a few jigs for the router, the stots jig, where you actually use their jig to make your own jig or the ez pro at home deposit. Not really looking for a $500 production dovetail jig, although it would be nice.

Thanks for any advice.
Greg